Could we not load our own divisions into an off-the-shelf ERP's product tree?

You can, but what gets loaded is a list, and the schema outside still decides which level a division sits on. On Plastik ve Makina the family's own divisions built the tree, which is why a top-level heading matches the word used at the bench.

Plastik ve Makina is a listings platform. What use is it to a manufacturer?

That it is a listings platform, plainly: stock counting, current accounts and the accounting ledger are not inside that job. What travels is where the catalogue's classification comes from, which is the decision whoever opens a product card makes every day.

Do you have evidence on the stock and accounting side as well?

We do, in a different job: in AlgoCar, our own product, a work order, the part consumed and the invoice are read off one record. What this page describes is the classification of the product card. Production planning, the supply chain, consolidated finance and human resources sit outside both.

Our workshop is in Pendik and our technician covers several service points. Can this tree be built without seeing the machines?

It can. No office, no site visits: the work runs remotely end to end. What is needed is not a look at the shop floor but the list of properties that separate two machines, and the tree comes out of that list once we have written it down together.

ERP · Pendik

ERP for Pendik businesses

In Pendik the difference between two machines from one family is not visible at a glance: it sits on the chassis plate, in the platen group, in the tonnage. A ready-made product tree has no level for that, so the distinction gets tacked onto a product code as an extra letter, and the meaning leaves with whoever typed it. What ERP software in Pendik, Istanbul has to settle is classification rather than reporting. On Plastik ve Makina, one machine family's own divisions built the category tree.

Get a quote Tell us about your project

ERP — Pendik

A manufacturer and a multi-site service outfit around Pendik's Kurtkoy read the same product card differently: one buys the machine, the other pulls its spare off a shelf. Where the classification never came from the trade's own language, both sides end up reading the card against the grain. The work closest to this district's production profile is Plastik ve Makina. Where it does not overlap: it is a listings platform, so stock counting and the accounting ledger are outside it, and production planning is not work we can show. What carries across is where the product tree comes from. The limit is listed too: human resources, consolidated finance, the supply chain and production scheduling stay out. Laravel runs it, Inertia carries the list to the browser, MySQL holds the records, Redis the cache, Tailwind the screens.

The top level of the category tree opens on one machine family's own divisions rather than on a classification imported from outside.
Because the division lives in the tree itself, defining a new machine is not an argument about which branch it belongs to, and nothing has to be appended to a product code.
The evidence has an edge: Plastik ve Makina is a listings platform, so stock counting, current accounts and the accounting ledger are not inside that job.

Why Algoriel

Work order through to invoice

In AlgoCar information is entered once and carried on the same record from the work order to the invoice.
Stock moves next to the job

Parts leave stock against a work order, so nobody hunts for where a part went at month end.
The calculation becomes the quote

Resterm sizes a unit with an engineering calculation, and the result drops into the cart and the project record.
Where the scope stops

Operations, stock and accounting are in scope. Production planning, supply chain, consolidated finance and HR are not.

Work order, part and invoice on one chain

At AlgoCar a work order opens, the part consumed is written to it, and the invoice comes from that same record. The chain never splits across three programs.
The same movement is never typed twice

A part leaves stock the moment it is written to the work order. No warehouse screen sits waiting for the same consumption to be keyed in again.
Cost and revenue in one system

The trading and accounting side runs in the same system as the service record, so the two faces of a job are not reconciled after the fact.
Spend that accumulates on the asset

At AlgoCar servicing and repair build up under the plate and chassis record, so what a vehicle has cost in total is read from its own file.
Where a quote line came from

At Resterm you can trace a quote line back to the heating requirement that produced it.
From calculation to basket to project

The product the engineering calculation selects drops into the basket, the basket attaches to a project, and the project to its customer. The records stay on one chain.

Work like this

ERP · Case study

Plastik ve Makina — one machine family's own divisions build the category tree

Plastik ve Makina is a sector listings platform for buyers and sellers of plastic processing machinery. The decision that shaped it sits in the classification: the whole tree follows one machine family's own divisions, so a property that would be a sub-heading on a general industrial site becomes a top-level heading. A buyer reaches a machine through the words used at the bench, and a seller posts into that branch, not under a broad heading. Laravel prepares the list and Inertia carries it to the browser; MySQL holds the records, Redis the cache, Tailwind the screens. Stock counting and the accounting ledger stay outside the job.

Read the case study →

Working with Pendik teams, remotely

We have no office, so work for this city runs remotely and we do not offer on-site support. What was done, and why it was done that way, stays in writing. The project pages mark which builds came out of a partnership.

The first release ships as a working piece; extras follow later.
Every client we know of is in Turkey.
Decisions stay in writing; progress shows in working screens.

Frequently asked

Could we not load our own divisions into an off-the-shelf ERP's product tree?

You can, but what gets loaded is a list, and the schema outside still decides which level a division sits on. On Plastik ve Makina the family's own divisions built the tree, which is why a top-level heading matches the word used at the bench.
Plastik ve Makina is a listings platform. What use is it to a manufacturer?

That it is a listings platform, plainly: stock counting, current accounts and the accounting ledger are not inside that job. What travels is where the catalogue's classification comes from, which is the decision whoever opens a product card makes every day.
Do you have evidence on the stock and accounting side as well?

We do, in a different job: in AlgoCar, our own product, a work order, the part consumed and the invoice are read off one record. What this page describes is the classification of the product card. Production planning, the supply chain, consolidated finance and human resources sit outside both.
Our workshop is in Pendik and our technician covers several service points. Can this tree be built without seeing the machines?

It can. No office, no site visits: the work runs remotely end to end. What is needed is not a look at the shop floor but the list of properties that separate two machines, and the tree comes out of that list once we have written it down together.

ERP in other cities

The other cities where we publish this service are below, grouped by province.

Other services for this location

Is the cost of a job still meeting its revenue at month end?

Get a quote or open the service

ERP for Pendik businesses

ERP — Pendik

Why Algoriel

Work order through to invoice

Stock moves next to the job

The calculation becomes the quote

Where the scope stops

What we build

Work order, part and invoice on one chain

The same movement is never typed twice

Cost and revenue in one system

Spend that accumulates on the asset

Where a quote line came from

From calculation to basket to project

Work like this

Plastik ve Makina — one machine family's own divisions build the category tree

Working with Pendik teams, remotely

Frequently asked

Could we not load our own divisions into an off-the-shelf ERP's product tree?

Plastik ve Makina is a listings platform. What use is it to a manufacturer?

Do you have evidence on the stock and accounting side as well?

Our workshop is in Pendik and our technician covers several service points. Can this tree be built without seeing the machines?

ERP in other cities

Ankara

Istanbul

Izmir

Is the cost of a job still meeting its revenue at month end?

ERP for Pendik businesses

ERP — Pendik

Why Algoriel

Work order through to invoice

Stock moves next to the job

The calculation becomes the quote

Where the scope stops

What we build

Work order, part and invoice on one chain

The same movement is never typed twice

Cost and revenue in one system

Spend that accumulates on the asset

Where a quote line came from

From calculation to basket to project

Work like this

Plastik ve Makina — one machine family's own divisions build the category tree

Working with Pendik teams, remotely

Frequently asked

Could we not load our own divisions into an off-the-shelf ERP's product tree?

Plastik ve Makina is a listings platform. What use is it to a manufacturer?

Do you have evidence on the stock and accounting side as well?

Our workshop is in Pendik and our technician covers several service points. Can this tree be built without seeing the machines?

ERP in other cities

Ankara →

Istanbul →

Izmir →

Is the cost of a job still meeting its revenue at month end?

Ankara

Istanbul

Izmir